How To Mod Your Paintball Mask?

How do you customize a paintball mask?

Here’s a guide for painting your paintball mask.

  1. Disassemble your mask.
  2. Cover the areas that can’t be painted (like your goggles) with painter’s tape.
  3. Apply a few thick coats of paint to your mask and let it dry.
  4. Attach your stencil and paint it on.
  5. Let your mask dry and then put it back together!

How do you keep a paintball mask from fogging up?

The basic principle is to spray a mist of the anti- fog onto the inside of your lenses and vapor will no longer gather on your mask. People have reported mixed results, but it is the cheapest and easiest way to stop fog.

Can I spray paint my paintball gun?

The best way to paint your paintball gun is to get it anodized, with the second-best being powder coated, and of course, spray painting would be the worst of the three. However, using spray paint is by far the cheapest option, and you can do it all by yourself.

How do you paint a plastic mask?

Prepare the mask blanks for painting by covering them with a coat of gesso. Plastic masks should be sprayed with a coat of plastic -fusion spray paint in white or black, or the plastic mask can be roughed up with a bit of sandpaper, then covered with gesso. Allow the prep coat to dry thoroughly.

You might be interested:  Why Do Paintball Players Like Flexible Mouthguards?

What is a thermal lens paintball mask?

A thermal, or dual pane, paintball lens is a type of protective mask lens that greatly reduces fogging while playing. These are comprised of two separate lenses. A thermal lens combats this by sandwiching a layer of air between the lenses.

How do you keep a gas mask from fogging up?

if you want to get really crazy you can buy a kit that uses a small computer fan to circulate air through your mask and stops it from fogging up.

Can you wash foam masks?

You can hand wash or put the mask in the washer, the latter of which the CDC says should suffice to properly clean it. Then, you can let it air dry or put it in the dryer on the hot setting to help kill any potentially remaining particles.

How do you clean the dye on a i5 lens?

You need to take the lenses right out of the mask as soon as you get home and clean them with a damp microfiber then a dry one, on both sides of the lense. You can carefully run luke warm water over the outside of the lense but don’t let it run over the back side or you’ll ruin the seal on the thermal fairly quick.